Products
Fragment-Retention Laminated Bullet-Resistant Glass
  • Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass
  • Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass
  • Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass
  • Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass
  • Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass
  • Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass

Fragment-Retention Laminated Bullet-Resistant Glass

Tianjin tianbo glass exporter/wholesaler: Fragment-Retention Laminated Bullet-Resistant Glass for bulk sale. Its laminated interlayer holds shattered fragments firmly in place after impact or ballistic attack, reducing secondary injury and helping maintain visibility. Ideal for armored vehicles, security booths and bank counters. Custom sizes and layer configurations are available.

    Tianjin tianbo glass exporter/wholesaler supplies Fragment-Retention Laminated Bullet-Resistant Glass for bulk sale, serving high-security vehicles and facilities. It uses multiple glass layers bonded with PVB and polycarbonate interlayers. After ballistic impact, the interlayer anchors shattered fragments in place, reducing secondary injury and keeping a temporary visual barrier for evacuation. It suits armored cars, cash-in-transit vans, bank counters, checkpoints and display cases. Custom sizes, curvatures and layer configurations are available. Controlled lamination and inspection ensure stable bonding and clarity. Bulk orders are available.

    Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass


    operational principle

    -Composition of core material: Fragment-Retention Laminated Bullet-Resistant Glass takes multi-layer glass substrate and high tenacity interlayer such as PVB and polycarbonate as the core material, and the impact resistance, penetration resistance and debris retention capacity are considered through material matching.

     

    -Multi-layer lamination and prepressing: After cutting, edging and cleaning of the original lamination, the glass and the intermediate layer shall be laminated layer by layer in order, and the layers shall be aligned and leveled. First, prepressing shall be carried out to exhaust air, so as to initially bond each layer and avoid the impact of bubbles and impurities on the quality of finished products.

     

    -High-pressure solidification molding: the prepressed semi-finished products are sent to the high-pressure equipment to fully melt and bond the intermediate layer under high temperature and pressure, and the multi-layer materials are pressed into a whole, so as to ensure the stability of the adhesive force between layers, and the energy can be effectively dispersed and the debris can be adhered when impacted.

     

    -Inspection and performance confirmation: check the interlayer bubble, degumming, impurity and optical distortion piece by piece, and test the ballistic and impact resistance by sampling according to the regulations. After confirming that the debris retention effect and visual clarity meet the standard, carry out corner protection packaging.


    Specifications

    Customization

    Available

    After-sales Service

    Replacement&Return&Refund

    Type

    Laminated Glass

    Shape

    Flat

    Appearance

    Flat

    Structure

    Solid

    Layer Type

    Bullet-Resistant Glass

    Function

    Bullet-proof

    Intermediate Film

    PVB or SGP

    Melting Point

    High Temperature

    Color

    Clear

    Usage

    Furniture, Door, Building, Window

    Name

    Tianbo Laminated Glass

    Special Fucnction

    Bulletproof,Fireproof,Soundproof,HeatInsulation

    Glass Type

    Low-E,Tempered,Float,Tinted,Laminated

    Application

    Building, Shower Door, Balcony, Railing

    Polish

    Sand Edge/ Polish Edge/ High Poilsh Edge

    Transport Package

    Strong Plywood Packing, Slip by Wooden

    Specification

    Customized

    Origin

    China

     

    Recommendations for model selection

    -First set the benchmark according to the protection level and the use scene: different vehicles, sentry boxes, and bank counters have different requirements on the ballistic and impact resistance levels. When selecting Fragment-Retention Laminated Bullet-Resistant Glass, the test standard, protection grade and installation position for the project shall be determined first, and then the number of glass layers, type of intermediate layer and overall thickness shall be confirmed, so as to avoid judging the protection capacity only according to the thickness or unit price.

     

    -Focus on debris retention and inter-layer configuration: The debris retention effect depends on the matching and compositing process of intermediate layers such as PVB and polycarbonate. For type selection, confirm the material and number of intermediate layers and the matching method with the glass substrate, and combine the visual field maintenance after being fired, secondary damage control and comprehensive evaluation of daily impact resistance requirements, not only compare the total thickness.

     

    -Size, curvature and weight shall match the installation structure: According to the vehicle window, sentry box or counter frame, confirm the customizable size, curvature and hole location, and evaluate the impact of glass weight on the frame, lifting mechanism and installation node. The processing shall be completed before the lamination. The finished product should not be cut and opened again. The drawings and installation clearance shall be confirmed clearly in the selection stage.

     

    -Check certification data and batch acceptance standards: test report of corresponding protection level shall be provided before procurement, and check whether product structure, interlayer configuration and test direction are consistent with the order. For batch orders, it is suggested that the appearance, optical distortion and debris retention performance shall be confirmed by lofting, and the acceptance basis, packaging protection and after-sales treatment methods shall be specified in the contract.

    Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass


    Product Comparison

    Comparison Item

    Toughened Glass

    Standard Laminated Glass

    Fragment-Retention Laminated Bullet-Resistant Glass

    Structure

    Single float glass with tempering treatment

    Two glass sheets + PVB interlayer

    Multi-layer float glass bonded with special ballistic polymer film (PVB/SGP)

    Impact & Ballistic Performance

    Not bulletproof; breaks easily under hard impact

    Non-ballistic; fragments stick to interlayer upon breakage

    Withstands bullets of specified levels; only local cracking after shooting

    Breakage Feature

    Breaks into small granules, particles may fall off

    Cracks spread; fragments adhere to film, may separate under heavy impact

    Glass remains integral after impact. All fragments are locked in place, no falling debris to cause secondary injury

    Strength Standard

    Safety glass for furniture & construction

    Architectural safety glass for anti-smash

    Ballistic security glass, graded to EN1063 standard

    Processing Limit

    Cannot be cut or drilled after tempering

    No cutting after lamination

    No cutting or grinding after finished

    Typical Application

    Table tops, shelves, ordinary doors & windows

    Curtain walls, railings, skylights

    Bank counters, security checkpoints, diplomatic premises, observation windows

    Cost

    Low

    Medium

    High due to multi-layer composite construction

     

    Our factory

    -Enterprise positioning and certification basis: Tianjin Tianbo Technology Development Co., Ltd. , located in Jinghai Development Zone, Tianjin, is a comprehensive deep processing enterprise specialized in research, development and production of tempered, hollow, laminated, fireproof, bulletproof and other building safety glass. It has passed 3C safety system certification in all respects, and has the supporting production capacity of multi-class safety glass.

     

    -Plant scale and capacity support: the plant area is 30000 square meters, with more than 140 employees; The annual capacity of tempered glass is 1000000 square meters, the annual capacity of insulating glass is 600000 square meters, the annual capacity of laminated glass is 350000 square meters, and the annual output value is more than 100 million yuan. Such capacity structure can support engineering batch order and conventional supply, and provide basis for production scheduling and delivery management.

     

    -Production equipment and process capacity: The company is equipped with advanced glass production equipment such as horizontal toughening, bending toughening, hollow and interlayer at home and abroad, and imported advanced vacuum sputtering coating equipment and technologies are introduced to produce LOW-E insulating glass. Multi-class equipment and process matching make the processing and quality control of laminated, bulletproof and fireproof composite glass more stable.

     

    -Team management and quality assurance: Tianbo has a professional team with rich production experience and pioneering innovation, and has established a modern production management system and R&D strength, focusing on talent training and management. The company adheres to people-oriented principle, provides good welfare and office and accommodation environment for employees, keeps the team cohesive and provides support for product quality, delivery stability and continuous improvement.

    Fragment-Retention Laminated Bullet-Resistant GlassFragment-Retention Laminated Bullet-Resistant Glass


    FAQ

    Can you do the production as customized?

    Yes, we have a professional technique team, we could produce the glass depends on your requirements.

    What are the delivery and payment terms?

    Delivery: Express delivery and sea. Payment: easy money transfer T/T

    What is the lead time for delivery?

    20-25 days after deposit and confirmation of the pre-production sample.

    What is your minimum order quantity?

    Our MOQ is 1*40 FCL. Mixed loading of various glass products is available for one full container.



    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept