Products
Monolithic Bullet-Resistant Glass for ATM Booths
  • Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths
  • Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths
  • Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths
  • Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths
  • Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths
  • Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths

Monolithic Bullet-Resistant Glass for ATM Booths

Tianjin tianbo manufacturer/supplier: Monolithic Bullet-Resistant Glass for ATM Booths, customized. Single-layer structure resists ballistic impact without delamination, keeps clear visibility for users, and simplifies cleaning and maintenance. Ideal for ATM enclosures and security kiosks. Bulk orders supported.

    Tianjin Tianbo Glass manufactures Monolithic Bullet-Resistant Glass for ATM Booths, designed for automated teller machine enclosures, bank self-service areas, security kiosks and other protective structures. Its single-piece glass construction provides a transparent barrier for ATM users and banking facilities. The glass is processed according to specified dimensions, thickness and edge requirements to match different booth designs and installation frames. Custom panel sizes and edge finishing are available for projects with different structural requirements. Factory production, quality inspection and technical support are available for customized orders, wholesale supply and security glazing projects.

    Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths


    What Is It

    Monolithic Bullet-Resistant Glass for ATM Booths is a single-piece protective glass product intended for ATM self-service kiosks, bank service areas and security booths. Unlike multi-layer glass constructions, it consists of one continuous piece of glass without an intermediate film or bonding layer. Its specifications are determined by the required application, glass dimensions, thickness and processing method. The smooth glass surface allows routine cleaning and inspection, while customized edge processing helps the panel fit different installation structures. The actual ballistic protection level must be confirmed through testing of the finished glass product.


    Product Advantages

    Single-piece glass construction: The product uses a single-piece glass structure without additional bonding layers. This construction provides a straightforward glass configuration and avoids problems associated with bonding-layer separation. It is suitable for projects that specifically require monolithic protective glazing.

     

    Simpler daily cleaning and maintenance: The smooth glass surface can be cleaned with a soft cloth and suitable neutral cleaning products. Routine maintenance mainly involves checking the glass surface, edges and installation condition, making daily care more straightforward for bank branches and self-service facilities.

     

    Clear visibility: Transparent glazing allows ATM users to observe their surroundings while operating banking equipment. It also helps bank staff inspect the booth interior and carry out maintenance without unnecessarily obstructing visibility.

     

    Customized dimensions and edge processing: Panel dimensions, thickness, edge finishing and other processing details can be coordinated according to ATM booth drawings and frame specifications. This helps the glass fit different enclosure designs and installation conditions.

     

    Project-based specification: Glass specifications can be discussed according to the required protection level, installation environment and applicable testing standard. This allows the product configuration to be evaluated against the actual requirements of each security project.

    Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths


    Specifications

    Parameter Specification
    Customization Available
    After-sales Service Online Technical Support
    Product Type Monolithic Bullet-Resistant Glass
    Glass Structure Single-Piece Glass
    Shape Flat
    Appearance Clear and Transparent
    Glass Processing Subject to Confirmed Product Specifications
    Color Clear
    Usage ATM Booths, Bank Kiosks and Security Enclosures
    Applications Banking Facilities and Security Booths
    Edge Processing Polished, Flat, Beveled or Chamfered
    Transport Package Protective Frames / Plywood Crates
    Specification Customized
    Origin Tianjin, China
    Thickness Customized
    Ballistic Protection Level Subject to Product Testing and Project Requirements


    Production Process

    Raw material selection and inspection: Glass substrates are checked for thickness, surface appearance, bubbles, inclusions and other visible defects before processing. This inspection helps confirm that the material meets the requirements of the selected production process.

     

    Cutting and dimension processing: Glass panels are cut according to confirmed drawings and dimensions. Length, width, diagonal measurements and edge allowances are checked to ensure compatibility with the ATM booth frame and installation openings.

     

    Edge grinding and finishing: Glass edges are ground and finished according to the required specifications. Polished, flat, beveled or chamfered edges can be considered according to the installation design. Any special edge requirements should be confirmed before production.

     

    Hole and cutout processing: Required mounting holes, notches and other openings are marked on the approved drawings before processing. Their positions and dimensions are checked against the installation requirements to reduce fitting problems during assembly.

     

    Cleaning and drying: Dust, oil and other surface contaminants are removed before further processing. Clean and dry glass surfaces help maintain product appearance and support consistent processing quality.

     

    Glass strengthening treatment: If required by the confirmed product specification, the glass undergoes the specified strengthening process. The processing method and resulting performance should be verified against the actual product specifications and applicable test requirements.

     

    Finished product inspection and packaging: Finished panels are inspected for dimensions, thickness, surface condition, edge quality and optical appearance. Required performance verification is carried out according to the agreed inspection plan. Qualified products are then packed with suitable corner and surface protection before shipment.


    ATM Booth Glass Selection Guide

    When selecting Monolithic Bullet-Resistant Glass for ATM Booths, project teams should consider the required protection level, glass dimensions, processing details and installation conditions. Confirming these requirements before production helps reduce drawing changes and installation problems.

    1. Confirm the Required Ballistic Protection Level

    Identify the security risks of the ATM location and the protection level required by the project. Confirm the applicable ballistic testing standard and grade with the project consultant or security system provider. The selected glass should have test documentation corresponding to its actual construction.

    2. Measure the Installation Area

    Provide the width, height and required thickness of each glass panel. Installation drawings should include the frame opening, support points and any special dimensions. Accurate measurements help the manufacturer prepare the production drawings.

    3. Confirm Edge and Opening Requirements

    Specify whether the glass requires polished, beveled or chamfered edges. Any mounting holes, notches or other openings should be marked clearly on the drawings and confirmed before production. Processing requirements should be finalized before the glass undergoes any strengthening treatment.

    4. Check Frame Compatibility

    The supporting frame, fixing method and installation structure should be suitable for the glass dimensions and weight. Confirm frame depth, fixing points, sealing details and installation clearances before placing the order.

    5. Review Test Reports and Product Documentation

    Request the relevant test documentation for the proposed glass configuration. Check the tested glass type, dimensions, thickness and applicable protection standard to ensure that the documentation corresponds to the product specified for the project.

    Selection Factor Information to Confirm
    Application ATM booth, bank kiosk or security enclosure
    Protection Requirement Required ballistic standard and protection grade
    Glass Dimensions Width, height and thickness
    Glass Construction Single-piece glass structure
    Processing Requirements Edge finishing, holes and cutouts
    Installation Conditions Frame drawings, support points and fixing method
    Order Details Quantity, destination and delivery schedule
    Documentation Relevant ballistic test reports and product specifications


    ATM and Security Booth Applications

    This single-piece protective glass can be specified for different banking and security environments where transparent protective glazing is required. Panel dimensions, thickness and edge processing can be coordinated with the enclosure design and installation drawings.

    ATM Self-Service Enclosures

    Used in ATM booths and self-service areas to provide transparent protective glazing around automated banking equipment. Clear glass helps users maintain visibility of the surrounding area during transactions.

    Bank Security Kiosks

    Suitable for security kiosks and enclosed service areas in bank branches. Custom panel dimensions and edge finishing help accommodate different frame structures and booth layouts.

    Security Guard Booths

    Can be specified for security guard booths in commercial buildings, financial facilities and controlled-access locations where visibility and tested ballistic protection are required.


    Why Choose Us

    Glass processing experience: Tianjin Tianbo Glass was established in 2014 and has experience in architectural safety glass processing, including glass cutting, edge grinding, strengthening treatment and edge quality control. For customized ATM glass projects, the processing plan can be reviewed according to panel dimensions and installation drawings to reduce the need for secondary processing after delivery.

     

    Factory and production facilities: The factory is located in Jinghai Development Zone, Tianjin, covering an area of 30,000 square meters and employing more than 140 people. Its production equipment includes glass cutting machines, edge-grinding equipment, tempering lines and other processing facilities. Production arrangements are coordinated according to the required glass specifications, order quantity and delivery schedule.

     

    Certification and inspection support: The company has passed 3C safety system certification and holds patents and software copyright certificates. Relevant quality documents and test reports can be discussed according to project requirements. Inspection procedures for raw materials, semi-finished products and finished glass support product quality checks and order traceability.

     

    Customized coordination and export services: Glass dimensions, thickness, edge treatment and installation details can be reviewed according to ATM booth and security kiosk drawings. The company supports customized orders, wholesale supply and project-based coordination. Export packaging, shipping documents and delivery communication can also be arranged according to order requirements.

    Monolithic Bullet-Resistant Glass for ATM BoothsMonolithic Bullet-Resistant Glass for ATM Booths


    Transportation and Packaging

    Packaging based on panel specifications: Packaging arrangements are determined by glass dimensions, thickness, quantity, transportation distance and handling conditions. Suitable protective materials are used to reduce the risk of surface scratches, edge chipping and corner damage during transportation.

     

    Separated and secured loading: Glass panels are packed and positioned to reduce movement and direct contact during transportation. Appropriate separation and fixing measures help limit collision risks during loading and unloading.

     

    Surface and edge protection: Protective materials are arranged around vulnerable edges and corners. During storage and transportation, the glass should be kept away from direct impact, excessive moisture and unsuitable handling conditions.

     

    Receipt inspection: Upon delivery, check the outer packaging, panel quantity, dimensions, surface condition and edges. If any damage or discrepancy is found, take photographs and contact the sales team promptly for assistance according to the order agreement.


    FAQ

    Is this product made of a single piece of glass?

    Yes. This product uses a monolithic single-piece glass structure. It does not contain an intermediate film or bonding layer. The glass dimensions, thickness and processing details are confirmed according to the project requirements.

    Can you manufacture glass according to customized drawings?

    Yes. Tianjin Tianbo Glass can review customer drawings and discuss customized dimensions, thickness, edge finishing and other processing requirements. Final production details should be confirmed before manufacturing.

    How do you determine the required ballistic protection level?

    The required level depends on the ATM location, security assessment and applicable project standards. Please provide the intended application and required testing standard so the proposed glass configuration and available test documentation can be reviewed.

    Can the glass be cut or drilled after delivery?

    Secondary cutting, drilling and edge processing are not recommended after the glass has undergone its specified strengthening treatment. These requirements should be confirmed before production and completed using the appropriate manufacturing process.

    How are MOQ and delivery time determined?

    MOQ is evaluated according to panel dimensions, thickness, processing requirements and order quantity. Delivery time depends on drawing confirmation, raw material availability, production arrangements and inspection. The confirmed schedule will be provided according to the order details.

    How can I get a quotation?

    Please provide the glass dimensions, thickness, quantity, required protection level, processing details and delivery destination. Drawings and applicable testing requirements will also help the manufacturer evaluate the project and prepare a quotation.

    What payment terms do you accept?

    T/T is accepted. Other payment arrangements can be discussed and confirmed according to the order agreement.


    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept