Products
Heat-Strengthened Silkscreen Fritted Glass
  • Heat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted Glass
  • Heat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted Glass
  • Heat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted Glass
  • Heat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted Glass
  • Heat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted Glass

Heat-Strengthened Silkscreen Fritted Glass

Tianjin tianbo glass, exporter offering Heat-Strengthened Silkscreen Fritted Glass for factory direct purchase. The fired ceramic frit delivers durable color and solar control, while heat-strengthened glass improves thermal stress resistance without the fragmentation pattern of fully tempered glass. Suitable for facades, spandrels and decorative panels requiring stable appearance and reliable outdoor performance.

    Tianjin tianbo glass, an exporter and wholesaler of architectural glass, supplies Heat-Strengthened Silkscreen Fritted Glass for bulk order and project purchase. This product is made by printing ceramic frit onto glass and firing it during heat-strengthening, so the color and pattern become part of the surface. Heat-strengthened glass offers higher strength and thermal stress resistance than annealed glass, yet breaks into larger pieces rather than small dice, making it suitable for facades, spandrel panels, curtain wall vision areas and decorative glazing where flatness and appearance are important. The frit layer provides durable color, solar control and design flexibility. Custom patterns, coverage and sizes are available for professional buyers.

    Heat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted Glass


    operational principle

    The Heat-Strengthened Silkscreen Fritted Glass is based on a glass master sheet, which is cut, edged and cleaned before the ceramic glaze is screen printed to the design pattern on the surface. Following drying, the glass is heated to near softening temperature in a heating furnace and then cooled uniformly under controlled conditions. During the cooling process, the compressive stress is formed on the surface of the glass and the tensile stress is formed inside the glass, so the strength and thermal shock resistance of the glass are higher than that of the ordinary annealed glass, but the stress level is lower than that of the fully tempered glass, and the glass is usually broken into large pieces rather than small particles. At the same time, the high temperature makes the ceramic glaze melt and firmly sinter on the glass surface, making the pattern and color become a part of the glass, giving consideration to decoration, weathering and shading effects.

    Heat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted Glass


    Specifications

    Customization

    Available

    Product

    Heat-Strengthened Silkscreen Fritted Glass

    Glass color

    Clear, ultra clear, bronze, grey, blue, green, black, etc

    Payment

    T/T

    Maximum specifications

    2440mm*4500mm

    Shape

    Flat

    Appearance

    Flat Tempered

    Steel Degree

    Tempered Glass

    Technics

    Physically Tempered

    Flatness

    High Class

    Usage

    Building

    Color

    Clear

    Measuring Unit

    Square Meters

    Product

    Tempered Glass

    Edgework

    Flat

    Type

    Flat Glass

    Package

    Wood Case

    Material

    Float Glass

    Transport Package

    Plywood Case

    Origin

    China

     

    Recommendations for model selection

    First, confirm the glass type according to the use parts and specifications: Heat-STscreen Fritted Glass has higher strength than ordinary annealed glass, with good thermal shock resistance. It usually appears large fragments when cracked, and it is suitable for the parts with external flatness and thermal stress requirements, such as curtain wall window, back plate and decorative panel. However, if the project specification clearly requires the state of small particle fragments or anti-falling performance of safety glass, the laminated composite and other solutions shall be evaluated, and the fully tempered glass cannot be replaced by the heat strengthened glass only.

     

    The glaze pattern shall be balanced with sunshade and light transmission: according to the building orientation, indoor daylighting, sunshade and privacy requirements, the glaze point coverage, color and arrangement method shall be determined. It is suggested to conduct lofting first, confirm color difference, light transmission effect and pattern continuity after multiple pieces are assembled under different light and observation distance, and avoid only looking at electronic effect picture selection.

     

    Size division and thermal stress concentration shall be evaluated in advance: glass specification shall be determined according to curtain wall division, opening size, transportation, hoisting and installation conditions to avoid thermal stress concentration caused by oversized division or partial shielding. Hole location, notch and edge processing shall be completed before heat treatment, and secondary cutting and opening are not allowed for finished products.

     

    Frame node, certification and acceptance standard shall be checked synchronously: confirm whether the frame clearance, sealing drainage and installation stress mode are suitable, and check 3C and other data and project requirements on fragment state, wind pressure resistance and weather resistance. It is suggested to sample before batch, and the color difference, edge joint, patch and packaging acceptance standard shall be specified in the contract.


    why choose us

    One-stop supporting of all kinds of safety glass: Tianbo focuses on the R&D and production of tempered, hollow, laminated, fireproof, bulletproof and other building safety glass, which can provide a variety of supporting options for building projects and reduce the time and communication costs for customers to coordinate among multiple suppliers.

     

    Certification system and standardized quality control: The company has passed the 3C safety system certification in an all-round way. Standardized procedures have been established from raw material selection, processing to finished product inspection. Attention has been paid to product safety performance and batch stability. It is suitable for engineering procurement with quality consistency requirements.

     

    Processing accuracy and capacity supported by advanced equipment: equipped with domestic and foreign advanced horizontal tempering, bending tempering, hollow, interlayer and other production equipment, and introduced vacuum sputtering coating equipment and technology to produce LOW-E insulating glass, which can meet the requirements of multiple types of processing and large-scale supply.

     

    Professional team guarantee model selection and delivery: it has a professional team with rich production experience, pioneering and innovative and modern management system, can provide glass configuration, processing and packaging suggestions according to the project drawings, pay attention to production scheduling coordination and delivery management, and provide stable support for long-term cooperation.

    Heat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted GlassHeat-Strengthened Silkscreen Fritted Glass


    FAQ

    Q: What is the difference between heat strengthened glass and fully tempered glass? How to choose a curtain wall project? 

    A: Heat strengthened glass is stronger than annealed glass with larger fragments. Fully tempered glass breaks into small safe particles. Select based on local safety codes for curtain walls.

    Q: Will the screen printed glaze layer fade or peel off when used outdoors? 

    A: The glaze is high-temperature sintered to glass. It is weather and abrasion resistant, not easy to fade or peel. Confirm with site and cleaning conditions.

    Q: Can we customize patterns, colors, and coverage? Can we make a sample before mass production?

     A: Yes, all can be customized. Sampling before production is suggested to check color, light transmission and splicing effect.

    Q: Can the finished product be cut, perforated, or edged again?

    A: No. Secondary processing damages stress and glaze layers. All cutting, drilling and edging must be finished before production.

    Q: What about MOQ, lead time and certificates?

    A: MOQ depends on size and pattern complexity. Lead time is confirmed after sample and artwork approval. 3C and other certificates are available per project needs.

     


    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept