Products
Tempered Ceramic Fritted Glass for Decoration
  • Tempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for Decoration
  • Tempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for Decoration
  • Tempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for Decoration
  • Tempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for Decoration
  • Tempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for Decoration

Tempered Ceramic Fritted Glass for Decoration

Tianjin tianbo, manufacturer, offers Tempered Ceramic Fritted Glass for Decoration with customized designs. Fired ceramic frit creates durable, fade-resistant patterns for decorative panels, partitions and feature walls. The tempered surface resists scratches and cleans easily, while colors and coverage can be tailored to match interior or exterior design schemes. Bulk orders are supported.

    As a professional manufacturer and supplier, Tianjin tianbo offers customized Tempered Ceramic Fritted Glass for Decoration, serving wholesale and project buyers. This decorative glazing is made by printing ceramic frit onto glass and firing it during tempering, so the pattern becomes a permanent part of the surface. It is suitable for interior feature walls, partition panels, elevator interiors, reception areas, retail displays and exterior decorative facades where color, pattern and durability matter. The fired frit resists fading, scratching and daily cleaning, while the tempered glass provides strength and safety. Colors, coverage, patterns and sizes can be customized to match different design schemes and installation requirements. Factory direct supply supports bulk orders and export projects.

    Tempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for Decoration


    Principle

    Material composition: Tempered Ceramic Fritted Glass for Decoration is based on a glass substrate with ceramic glaze printed on the surface. Glaze is usually composed of glass powder, pigments, and additives, which are combined with the surface of the glass after high temperature, making the pattern and color a part of the glass surface rather than a film layer attached later.

     

    Pattern printing and drying: The ceramic glaze is uniformly printed on the glass surface through screen printing or digital printing according to the design pattern, and then dried to preliminarily solidify the glaze layer. During the printing process, it is necessary to control the thickness of the glaze layer, the accuracy of the pattern, and the surface cleanliness to reduce missing prints, color differences, and impurities.

     

    Tempering and sintering molding: Glass with printed patterns enters a tempering furnace and undergoes tempering through high-temperature heating and rapid cooling, while the ceramic glaze melts and firmly sinter on the surface of the glass. The glaze layer is tightly combined with the glass to form a weather resistant and wear-resistant decorative surface, while tempering enhances the strength and safety of the glass.

     

    Inspection and finished product control: Finished products need to be checked for size, pattern integrity, color difference, glaze adhesion, surface scratches, and tempering quality. After confirming that the decorative effect and safety performance meet the standards, they are packaged and shipped, suitable for decorative panels, partitions, facades, and other parts.


    Specifications

    Customization

    Available

    Shape

    Flat

    Appearance

    Flat Tempered

    Steel Degree

    Tempered Glass

    Technics

    Physically Tempered

    Usage

    Building

    Color

    customized

    Product

    Tempered Glass

    Edgework

    Flat

    Type

    Flat Glass

    Package

    Wood Case

    Material

    Float Tempered Glass

    Transport Package

    Plywood Case

    Maximum specification

    2440mm*4500mm

    Origin

    China

     

    Certification

    CCC Certification

    Tianbo holds full CCC certification for tempered, insulated and laminated glass. For Tempered Ceramic Fritted Glass for Decoration, we control raw glass selection, frit printing, sintering and finished inspection strictly within the certification scope for easy customer verification.

    Patents & Software Copyrights 

    We own patents and software copyrights from continuous R&D in deep processing, equipment and production management. Our technical expertise ensures stable color, pattern and surface quality batch after batch for ceramic frit sintered products.

    Fire Test Documents Available 

    We can provide fire-resistance test reports for fire-rated projects. The structure, fire rating and applicable standards shall be subject to order confirmation and project requirements.

    Documentation for Project Approval 

    For engineering and export orders, we supply CCC certificates, test reports and other quality documents to support project filing and archiving. Please confirm the document list and certification scope before ordering to guarantee consistency with delivered goods.


    Product Application

    Tempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for DecorationTempered Ceramic Fritted Glass for Decoration

     

    Shipping and Packaging

    Key protection for decorative surfaces: The glazed pattern and visible surface of Tempered Ceramic Fritted Glass for Decoration are the parts that need to be protected during transportation. Corresponding protection will be arranged based on size, pattern, and quantity during shipment to reduce the risk of surface scratches, glaze scratches, and edge breakage. The specific method is subject to the order confirmation information.

     

    Pattern direction and batch identification: The packaging identification will try to correspond to the pattern direction, specifications, and batch information as much as possible, making it easy to identify and use according to the decorative parts and layout order after arrival, reducing direction confusion and assembly misalignment when mixing multiple specifications.

     

    Shipping fixation focuses on separation and stability: When loading or containerization, it should be placed reasonably according to the packaging label and product specifications, and fixed and separated properly to reduce sliding, tilting or collision during transportation, and avoid direct friction between decorative surfaces.

     

    Moisture prevention and receiving inspection: During transportation and temporary storage, attention should be paid to avoiding long-term moisture, water accumulation, and severe temperature differences, to prevent edge moisture or aging of protective film. It is recommended to check the outer packaging, pattern direction, and surface condition when receiving the goods. If there are scratches, broken edges, or abnormal patterns, take photos in a timely manner for evidence and contact the sales team to handle them according to the order agreement.


    why choose us

    Strong ability to implement decorative patterns: For orders such as Tempered Ceramic Fritted Glass for Decoration that value patterns and colors, Tianbo can confirm the layout, pattern direction, and glaze coverage before production, and verify color differences and visual effects through sampling to reduce pattern deviations or inconsistent assembly of multiple pieces after mass production.

     

    Multi specification decoration orders have flexible production scheduling: Decorative glass often involves different sizes, patterns, and batch combinations. The factory is located in Jinghai Development Zone, Tianjin, covering an area of 30000 square meters. It has multiple processes such as cutting, edging, printing, tempering, and inspection, which facilitate coordination and delivery in batches according to the project list.

     

    Equipment and Capacity Support Batch Supply: Equipped with horizontal tempered glass, curved tempered glass, hollow, laminated and digital printing, screen printing and other equipment, the annual production capacity of tempered glass is 1 million square meters, insulated glass is 600000 square meters, laminated glass is 350000 square meters, and we can undertake multi specification orders for decorative panels, partitions and facades.

     

    Certification and export matching facilitate project verification: The company has passed the 3C safety system certification and holds patents and software copyright certificates, which can provide corresponding quality information in conjunction with the project. For overseas orders, pattern direction identification, decorative surface protective packaging, and shipping document communication can be used to facilitate customer acceptance and subsequent patching.


    FAQ

    MOQ、 How to communicate the sample fee and delivery time?

    MOQ is evaluated based on size, pattern complexity, and order quantity, and samples can usually be arranged but may be charged. The delivery time is affected by document confirmation, printing, tempering, and inspection, and is subject to the order schedule.

    What documents are required for customizing decorative patterns? Can we make a sample first to confirm the color difference?

    Please provide high-definition design drawings, vector files, or layout drawings, and indicate colors, coverage, and dimensions. It is recommended to make a sample before mass production to confirm the clarity of the pattern, color difference, and decorative effect under actual lighting.

    How to control pattern continuity and color difference when assembling multiple pieces?

    It is necessary to complete the layout and slicing before production, confirm the joint position and pattern direction, and arrange for printing and tempering in the same batch as much as possible. It is recommended to specify the range of color differences and assembly acceptance standards in the contract.

    How to get a quotation? 

    We need the information of glass composition, thickness, sizes, quantity and processing etc.

    How long is your delivery time? 

    Generally within 3 weeks. If the goods are in stock, it can be 1 week. 

    Can you do the production as customized? 

    Yes, we have a professional technique team, we could produce the glass depends on your requirements. 



    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept