Products
Insulated Laminated Fire-Resistant Glass
  • Insulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant Glass
  • Insulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant Glass
  • Insulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant Glass
  • Insulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant Glass
  • Insulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant Glass
  • Insulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant Glass

Insulated Laminated Fire-Resistant Glass

Tianjin tianbo glass, exporter of Insulated Laminated Fire-Resistant Glass, offers bulk order supply. Its sealed insulating cavity improves thermal control, while the laminated fire-resistant interlayer blocks flames and smoke and holds fragments in place for safer evacuation.

    Tianjin tianbo glass supports factory direct purchase and customized orders for Insulated Laminated Fire-Resistant Glass, a composite glazing product developed for buildings that require both fire protection and thermal performance. It is commonly used in fire-rated partitions, exterior windows, curtain wall infill panels, fire doors and escape route glazing in commercial complexes, hospitals, schools, transport hubs and industrial facilities. The product combines an insulating cavity with laminated fire-resistant interlayers, helping reduce heat transfer while blocking flames and smoke and holding broken fragments in place. Production follows controlled cleaning, lamination, sealing and inspection procedures to ensure stable performance. Customized sizes, glass combinations, cavity widths and edge finishes are available, and factory direct purchase supports cost control, short lead times and consistent bulk supply for professional buyers.

    Insulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant Glass


    operational principle

    Insulated Laminated Fire-Resistant Glass consists of a laminated glass substrate, a fire barrier interlayer, and a cavity in the seal. In case of fire, the fireproof intermediate layer will be heated and expanded to form a thermal insulation and flame retardant barrier to help block the flame and high temperature smoke; The sandwich structure keeps the cracked fragments adhered and reduces the risk of splashing; The middle cavity slows down the heat transfer and gives consideration to daily insulation. In the production process, the original sheet is subject to cleaning, lamination, edge sealing, pressing or curing and inspection, so as to make the materials of each layer combined stably, so as to achieve the fire protection, safety and thermal insulation performance in the building fire compartment, doors and windows and curtain wall parts at the same time.


    Specifications

    Customization

    Available

    Type

    Float Glass

    Shape

    Flat

    Appearance

    Flat

    Structure

    Solid

    Layer Type

    Common Laminated Glass

    Intermediate Film

    PVB or SGP

    Melting Point

    High Temperature

    Production

    Dry Laminated Glass

    Color

    Customized

    Usage

    Furniture, Door, Window

    Keywords

    Laminated Fire-Resistant Glass

    Thickness

    Customizable on Request

    Application

    Architecture, Furniture

    MOQ

    1*40 FCL

    Custmized

    Customized

    Transport Package

    Seaworthy Plywood Crates

    Specification

    Standard Specifications or Customized

    Origin

    China

     

    Recommendations for model selection

    -First determine the structure according to the fire rating and use part : different building parts have different requirements on fire integrity and thermal insulation performance. When selecting Insulated Fire-Resistant Glass, the fire rating, test standard and installation position (fire doors and windows, partition, curtain wall filling, etc.) of the project shall be specified, and then the type of interlayer, width of middle cavity and number of glass layers shall be confirmed, so as to avoid only selecting the model according to the unit price.

     

    -Mezzanine to match cavity configuration: Fireproof intermediate layer determines fire and smoke stopping and debris retention, cavity affects insulation. During type selection, confirm whether the material and thickness of the fireproof interlayer and the cavity are aerated or dry, and adjust the glass combination in combination with the energy conservation objective to avoid performance degradation due to mismatching between the interlayer and the hollow structure.

     

    -Glass base material and thickness shall be determined according to stress and processing process: glass thickness and whether it is tempered shall be selected according to slice size, wind pressure, installation height and frame system. The processing sequence shall be confirmed in advance: cutting, edging and opening shall be completed before tempering or laminating. Edge sealing and cavity sealing process directly affect the durability of the fireproof layer, and secondary cutting on the finished product is not allowed.

     

    -Check the certification, edge sealing and frame joints: the fire test report shall be provided at the selection stage, and the product structure and grade shall be checked to be consistent with the order; At the same time, confirm whether the edge sealing materials, spacing bars and drainage design are suitable for the frame system, so as to ensure continuous sealing and stable stress after installation, and avoid the impact on the fire protection and insulation effect due to the unmatched joints.

    Insulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant GlassInsulated Laminated Fire-Resistant Glass


    Our factory

    Comprehensive deep processing has clear positioning: Tianjin Tianbo Technology Development Co., Ltd. (hereinafter referred to as "Tianbo") focuses on R&D and production of tempered, hollow, laminated, fireproof, bulletproof and other building safety glass, and has passed 3C safety system certification. The enterprise is located in Jinghai Development Zone, Tianjin, with the deep processing capacity of various types of glass, which can provide complete supporting options for building projects.

     

    The capacity and output value form the delivery basis: the plant area is 30000 square meters, and more than 100 employees. The annual capacity of tempered glass is 1000000 square meters, the annual capacity of insulating glass is 600000 square meters, the annual capacity of laminated glass is 350000 square meters, and the annual output value is more than 100 million yuan. Such capacity structure can support conventional order and engineering batch supply, and provide basis for production scheduling and delivery management.

     

    Combination of equipment technology and LOW-E product advantages: Tianbo is equipped with domestic and foreign advanced horizontal tempering, bending tempering, hollow, interlayer and other production equipment. The imported advanced vacuum sputtering coating equipment and technology are adopted for LOW-E insulating glass, which is characterized by high light transmittance, low reflectance and high heat resistance, and more suitable for the design direction of environmental protection and energy conservation of modern buildings.

     

    Pay equal attention to team management and R&D culture: the company has a professional team with rich production experience and pioneering innovation, and has established a modern production management system and R&D strength. The enterprise adheres to the principle of people-oriented, focuses on talent training and management, provides good welfare and office accommodation environment for employees, keeps the team cohesive and provides support for product quality and continuous improvement.


    FAQ

    1 How does this hollow laminated fireproof glass give consideration to fire protection and insulation?

    Fire and smoke stopping in the fireproof intermediate layer, and heat transfer in the middle cavity is slowed down. The configuration shall be confirmed according to the fire rating and energy conservation objectives of the Project during type selection.

    2 Will the middle cavity affect fire performance or cause failure of the edge seals?

    The middle cavity shall be matched with the fireproof interlayer and edge sealing process. During procurement, the manufacturer can be required to explain the edge sealing structure and inspection method.

    3 Are custom sizes, glass combinations and fire ratings supported?

    Support customized dimensions, glass combinations, cavity widths and fire ratings per drawings. Processing shall be completed before lamination, and secondary processing is not allowed for finished products.

    4 What fire test reports or certifications can be provided?

    The fire test report or certification data can be provided according to the project requirements, and the specific standards shall be confirmed according to the destination country. When purchasing, please check whether the report is consistent with the order configuration.

    5  MOQ、 How to arrange delivery date and packaging and transportation?

    MOQ is evaluated by size, configuration, and order complexity, with lead time for compounding, curing, and inspection. The protective film, foam, wooden frame or wooden box shall be used for packaging, and the corner shall be protected.

     


    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept