Products
SGP Laminated Glass for Banks and Jewelry Stores
  • SGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry Stores
  • SGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry Stores
  • SGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry Stores
  • SGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry Stores

SGP Laminated Glass for Banks and Jewelry Stores

Tianjin tianbo, manufacturer and supplier, offers SGP Laminated Glass for Banks and Jewelry Stores. Its high-strength SGP interlayer resists forced entry and smash-and-grab attacks, while maintaining clarity and UV protection. Ideal for security glazing, display cases and partitions. Bulk orders supported.

    Tianjin tianbo, manufacturer and supplier, offers SGP Laminated Glass for Banks and Jewelry Stores for wholesale, factory direct and customized order. This security glazing uses a high-strength SGP interlayer bonded between glass layers, giving it much greater resistance to impact, forced entry and smash-and-grab attacks than conventional laminated glass. It is widely used in bank counters, teller windows, jewelry display cases, storefronts and security partitions where clear visibility and reliable protection are both required. The SGP interlayer also helps hold broken fragments in place and provides UV filtering. Panels can be customized in size, thickness, glass type and edge finish to match different security designs and installation nodes. Strict lamination and inspection help maintain optical clarity and stable performance for bank and jewelry projects.

    SGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry Stores


    Working principle

    Material composition and protection principle: SGP Laminated Glass for Banks and Jewelry Stores uses glass substrate and high-strength SGP (ionic) intermediate layer as the core material. The strength, rigidity, and adhesion of the SGP intermediate layer are significantly higher than those of ordinary PVB. It can more effectively absorb and disperse energy when impacted, resist violent intrusion and smashing, and firmly adhere fragments after glass breakage, reducing the risk of splashing and penetration.

     

    Splicing and pre pressing process: After cutting, grinding, and cleaning the glass raw film, it is stacked in the order of "glass SGP film glass", and the layers are aligned and leveled; Subsequently, pre pressing is carried out to expel most of the air between the layers, allowing the glass and film to be initially bonded to avoid bubbles and impurities affecting the final transparency and bonding strength.

     

    High pressure solidification molding: The pre pressed semi-finished product enters the high-pressure reactor and is fully melted and flowed in the SGP intermediate layer under high temperature and pressure environment, firmly bonded to the glass surface, and forming a whole sandwich structure. This process determines the interlayer adhesion, impact resistance, and optical quality of the finished product, and is a key link in ensuring stable protective effects.

     

    Inspection and performance confirmation: The finished product needs to be inspected for interlayer bubbles, impurities, delamination, optical distortion, and edge condition, and the impact resistance and penetration resistance performance should be verified by sampling according to regulations. Qualified SGP laminated glass can only be used in areas with high safety requirements such as bank counters, jewelry display cabinets, and security partitions.


    Specifications

    Customization

    Available

    After-sales Service

    on-Line Technical Support

    Shape

    Flat

    Appearance

    Flat

    Structure

    Solid

    Layer Type

    Common Laminated Glass

    Function

    Decorative

    Melting Point

    High Temperature

    Production

    Dry Laminated Glass

    Color

    Clear

    Usage

    Furniture, Door, Building, Window

    Special Fucnction

    Fireproof,Waterproof, Soundproof,Heat Insulation

    Glass Type

    Low-E,Tempered,Forsted,Float,Tinted,Laminated

    Application

    Building, Shower Door, Balcony, Railing

    Polish

    Sand Edge/ Polish Edge/ High Poilsh Edge

    Transport Package

    Strong Plywood Packing, Slip by Wooden

    Specification

    Customized

    Origin

    China

    Production Capacity

    350000 square/Year

     

    Selection suggestions

    Firstly, determine the security level based on the protection scenario: bank counters, cash areas, jewelry display cabinets, and street facing windows face different risks of violent intrusion and robbery. When selecting, the usage location, personnel protection requirements, and project specifications should be clearly defined. Then, determine the number of glass layers, SGP intermediate layer configuration, and overall thickness of SGP laminated glass for banks and jewelry stores to avoid selecting only ordinary laminated glass.

     

    Pay attention to the matching between the SGP intermediate layer and the glass substrate: The strength, rigidity, and adhesion of the SGP intermediate layer are higher than those of ordinary PVB, but it needs to be matched with the thickness, number of layers, and installation method of the glass to achieve the protective effect. When selecting, the manufacturer should explain the SGP film specifications, lamination process, and impact resistance performance, and confirm the optical quality in conjunction with the display transparency requirements.

     

    The installation nodes and frame load-bearing should be confirmed synchronously: Safety glass in banks and jewelry stores usually has a large area and high weight, and the frame, hardware, and fixing methods need to have corresponding load-bearing capacity. When selecting, the installation nodes, glue joints, closures, and anti pry designs should be checked to avoid affecting the overall protection effect due to insufficient frame strength or improper installation gaps.

     

    Edge processing and hole positioning should be locked before production: SGP laminated glass should not be cut, drilled, or edged again after completion. All hole positions, notches, and edge processing should be confirmed before lamination. When used for display cabinets, partitions, or doors and windows, drawings and hardware nodes should be provided in advance to reduce on-site processing and installation deviations.

     

    Sample making and verification of certification and acceptance standards before batch production: It is recommended to make samples to confirm transparency, interlayer quality, edge effect, and protective configuration before arranging batch production. The contract specifies the safety level, SGP configuration, acceptance criteria, packaging protection, and patch method, which facilitates the inspection and subsequent maintenance of bank and jewelry store projects.

    SGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry Stores


    why choose us

    Over ten years of deep cultivation in building safety glass, with solid experience in laminating technology: Since its establishment in 2014, Tianbo has focused on deep processing of tempered, hollow, laminated, fireproof, bulletproof and other building safety glass. The factory is located in Jinghai Development Zone, Tianjin, covering an area of 30000 square meters. Long term production accumulation enables the factory to have mature process control experience in key processes such as laminating, pre pressing, high-pressure curing, and edge treatment, which can be used to confirm glass configurations for security projects such as banks and jewelry stores.

     

    Adhesive production capacity and high-pressure equipment support batch orders: The annual production capacity of laminated glass is 350000 square meters, equipped with composite processing equipment such as adhesive high-pressure kettles and EVA furnaces, which can undertake the batch production of SGP adhesive glass and multiple categories of safety glass. The annual production capacity of tempered glass is 1 million square meters, and the annual production capacity of insulated glass is 600000 square meters. The multi category production capacity foundation facilitates the coordination and delivery of engineering orders in batches.

     

    The certification and inspection system covers the main products: the company has fully passed the 3C safety system certification, and the main products such as tempered steel, hollow, and laminated have corresponding certification foundations, and can provide fire detection reports and other materials in conjunction with the project. During the production process, inspection and recording stages are set up for raw materials, semi-finished products, and finished products to facilitate quality traceability, project inspection, and subsequent patch verification for batch orders.

     

    Professional team and export support: The company currently has more than 140 employees and a production, quality inspection, and project coordination team that can confirm dimensions, hole positions, edge processing, and packaging methods based on drawings. For overseas customers, we can provide certification materials, packaging protection, and shipping document support, and establish communication processes around patching, rework, and abnormal feedback to facilitate long-term cooperation and project maintenance.

    SGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry StoresSGP Laminated Glass for Banks and Jewelry Stores


    SGP Laminated Glass

    SGP (Sentryglass Plus) is an ionic polymer of ethylene and methyl methacrylate, with SGP serving as an intermediate material to facilitate production.

    Products have more advantages.

    SGP has 5 times the tear resistance of PVB and 100 times its hardness, and the thermoplastic temperature of SGP material is relatively high

    PVB has a high temperature of 20 ℃, thus providing a wider range of rigidity and reliability, as well as better and safer maintenance in the event of glass breakage.

    Enabling SGP to effectively reduce the thickness of glass usage is an economical choice in the case of oversized glass partition design.

    Has lower moisture absorption. Effectively prevent the infiltration of moisture and avoid the generation of bubbles and delamination

    SGP still has the ability to completely prevent ultraviolet rays from passing through, and the special formula SGP can also allow ultraviolet rays to pass through.

    SGP is bonded to metals through ionic bonding, exhibiting stronger bonding ability and a bonding strength of over 20.7 MPa.

    It is the preferred product for structural glass design.

    SGP has better transparency than PVB, and combining it with ultra white glass to form laminated glass is a bright and beautiful solution.

    Note: Common thickness: 0.89/1.52/2.28mm


    FAQ

    How to get a quotation?

    Please share glass structure, thickness, dimensions, quantity and processing requirements.

    What's the MOQ?

    We have no fixed MOQ for processed glass. Larger orders come with better pricing.

    What is the difference between SGP laminated glass and ordinary PVB laminated glass?

    The SGP intermediate layer has higher strength, rigidity, and adhesion, better impact resistance and penetration resistance, and is more suitable for security scenarios such as banks and jewelry stores.

    Can we customize the size, thickness, and glass combination?

    Okay. Sizes, thicknesses, glass types, and SGP configurations can be customized according to the drawings. The hole position and edge processing need to be confirmed before production, and the finished product should not be cut again.

    How to confirm the protective performance of the product?

    Manufacturers can be requested to provide SGP configuration instructions and relevant testing data to verify whether the glass structure, intermediate layer specifications, and testing conditions are consistent with the order.



    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept