Products
Tempered Laminated Glass Panel for Curtain Walls
  • Tempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain Walls
  • Tempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain Walls
  • Tempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain Walls
  • Tempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain Walls

Tempered Laminated Glass Panel for Curtain Walls

Tianjin tianbo glass, wholesale supplier of Tempered Laminated Glass Panel for Curtain Walls, offers custom production. The PVB interlayer keeps shattered fragments bonded, enhancing safety and security for high-rise facades, storefronts and skylights. Thickness 4-80mm, min width 300mm. Ground edges and stable lamination support precise installation. Bulk orders welcome.

    As a professional manufacturer and supplier, Tianjin tianbo glass offers Tempered Laminated Glass Panel for Curtain Walls, designed for high-rise commercial buildings, airports, and large public facades. This safety glass combines tempered strength with a PVB interlayer that holds fragments together after breakage, preventing dangerous falling shards and enhancing security. It withstands wind loads, thermal stress, and impact, while also improving sound insulation and reducing UV transmission. The panel can be customized with Low-E coatings, tinted or reflective glass, and precise edge work, holes, and cutouts. Suitable for unitized and stick-built curtain wall systems, it delivers a transparent, flush facade with long-term reliability. Bulk orders and project specifications are welcome.

    Tempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain Walls


    What is it

    A Tempered Laminated Glass Panel for Curtain Walls is a composite building glass made of two or more tempered glass panes permanently bonded together by a PVB interlayer under heat and pressure. In curtain wall applications, this panel serves as the primary transparent envelope, combining the strength of tempered glass with the safety of lamination. The tempered layers resist wind load, thermal stress and impact, while the PVB interlayer holds broken fragments in place, preventing dangerous fallout from height. The panel can be further combined with Low-E coatings or tinted glass to meet energy and aesthetic requirements, and is fabricated with precise edge work and cutouts for use in unitized or stick-built curtain wall systems.


    Products Attributes

    Customization

    Available

    Type

    Float Glass

    Shape

    Flat

    Structure

    Solid

    Layer Type

    Common Laminated Glass

    Intermediate Film

    PVB

    Production

    Laminated Glass

    Color

    Clear

    Usage

    Furniture, Building

    MOQ

    1*40 FCL

    Application

    Building

    Payment Terms

    T/T

    Specification

    2440mm*6000mm

    Origin

    China

     

    Production Characteristic

    -Safety fall prevention, suitable for high-rise curtain wall : Tempered Laminated Glass Panel for Curtainwall adopts tempered glass and PVB film composite, the fragments still adhere to the film after being damaged by impact, it is not easy to fall from high altitude, reduce the use risk of curtain wall, and take into account the transparent appearance and safety performance.

     

    -Outstanding wind pressure resistance and weather resistance: toughened treatment improves the glass strength, the sandwich structure enhances the overall toughness, can deal with the wind load, temperature difference change and thermal stress of the curtain wall for a long time, suitable for high-rise buildings, commercial facades and large-span daylighting parts.

     

    -Energy conservation and architectural aesthetic configuration can be combined: Low-E coating film, colored glass or colored glaze can be matched according to the project requirements, and sunshade, heat insulation and facade design effects can be taken into consideration, so that the curtain wall glass can meet the energy conservation requirements while maintaining the architectural appearance coordination.

     

    -Large plate customization and high processing accuracy: support large specification customization, reduce curtain wall joint, and improve the overall feeling of facade; Edge grinding, hole location and notch shall be processed before toughening, with stable size for installation of unit or component type curtain wall.

    Tempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain Walls


    Precautions for use

    -Check whether the frame body matches with the node before installation: After arriving at the site, check whether the size, hole location, edge processing and curtain wall division are consistent with the drawings, and check the flatness of the frame body, the reserved gap and the adhesive tape fit. Forced extrusion or partial stress shall be avoided during installation to ensure stable cooperation between glass and unit or component curtain wall system.

     

    -Pay attention to corner protection during hoisting and handling: large plate curtain wall glass is heavy, so special tools such as sucker and hoisting frame shall be used during handling to avoid collision with corner, dragging or stacking pressure. The site storage shall be placed vertically, padded with soft materials at the bottom, and kept away from moisture and ponding and severe temperature difference, so as to prevent the edge of the PVB interlayer from being affected with damp or the protective film from aging.

     

    -It is forbidden to cut and open holes again after tempering: once the tempered laminated glass is tempered, it is not allowed to cut, open holes or grind edges, otherwise the stress layer will be damaged and the whole piece will be broken. If the hole position or gap needs to be adjusted during installation, the drawing confirmation shall be completed before production, and the glass body shall not be changed or the edge seal shall not be damaged on site.

     

    -Do a good job of sealing, drainage and daily cleaning: After the curtain wall is installed, check whether the glue joint, drainage channel and edge sealing are continuous and intact, to avoid long-term water seepage into the edge of the interlayer. Use neutral detergent and soft cloth during cleaning to avoid strong acid and alkali, abrasive tools or high pressure water gun directly punching the edge, and prevent the adhesive, blister or surface damage of PVB film.


    About Delivery

    The delivery arrangement for the Tempered Laminated Glass Panel for Curtain Walls will be confirmed according to the order specifications, quantity, processing requirements and production schedule. Generally, production takes 20–25 days after submission and confirmation of the pre-production sample. Before the order is placed, we will communicate the estimated production cycle and shipment plan, and provide progress updates during production. The transportation method can be discussed based on the destination and customer's requirements. Packaging will focus on corner protection and transportation safety to reduce the risk of damage. The final delivery date, packing details and shipping documents will be based on the information confirmed by both parties. Any special requirements can be discussed and coordinated in advance.

    Tempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain WallsTempered Laminated Glass Panel for Curtain Walls


    FAQ

    What is your minimum order quantity and typical production lead time?

    Our MOQ is generally 1*40FCL,but we can be flexible for trial orders or project-based sourcing.Standard lead time is 20–25 days after deposit and drawing confirmation, depending on order volume and customization requirements. For urgent projects, we can discuss priority scheduling.

    What thickness and size options are available for the tempered laminated glass panels?

    We offer standard thickness ranges from 4mm to 80mm per glass layer,the maximum glass specification is 2440mm * 6000mm, and the minimum glass width is 300mm Panel sizes are fully customizable to your project drawings, and we can accommodate both standard and oversized panels for large-scale curtain wall projects.

    What is the difference between tempered laminated glass and ordinary tempered glass for curtain walls?

    Tempered laminated glass combines two or more glass layers with PVB/SGP interlayers. Even if the panel is broken by impact, the fragments remain adhered to the interlayer instead of falling, which provides much higher safety for high-rise curtain walls. It also offers better sound insulation, UV protection, and structural integrity compared to single tempered glass.

    How do the transportation and packaging of large panel curtain wall glass reduce the risk of damage? How to handle the damage liability?

    Large plates are usually packed with protective film, foam, wooden frame or wooden box. The corner and edge of interlayer will be protected, and attention shall be paid to fixation and anti-extrusion during cabinet installation. Specific packing and loading methods shall be determined according to the size, quantity and transportation mode. It is suggested to check the external package and glass state before receiving the goods. In case of any damage, take photos in time and contact the salesman for further treatment as agreed in the order.

     


    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept