Products
Argon-Filled Triple-Glazed Refrigeration Glass
  • Argon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration Glass
  • Argon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration Glass
  • Argon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration Glass
  • Argon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration Glass
  • Argon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration Glass

Argon-Filled Triple-Glazed Refrigeration Glass

Tianjin tianbo glass, wholesale supplier: Argon-Filled Triple-Glazed Refrigeration Glass, custom-made. Its sealed argon chambers slow heat transfer and resist condensation, keeping display cases clear and energy-efficient. Flat panes and ground edges ensure reliable fitting. Thickness 10-48mm; max 4000mm*2440mm. Bulk orders welcome.

    As a professional manufacturer and supplier, Tianjin tianbo glass offers Argon-Filled Triple-Glazed Refrigeration Glass for commercial and industrial cooling applications. This product is designed for refrigerated display cases, supermarket freezer doors, commercial refrigerators, cold storage rooms, beverage coolers and food service equipment where clear visibility and stable temperature matter. The triple-glazed structure with argon gas between the panes reduces heat transfer, helps maintain internal cold temperatures and lowers energy consumption. The sealed construction also resists condensation and fogging on glass surfaces, keeping products clearly visible. Each unit is cut to the required size, with edges ground and sealed for a flat, reliable fit in refrigeration frames. Custom sizes and thickness options are available to suit different cabinet designs and project requirements.

    Argon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration Glass


    Product Principle

    Argon-Filled Triple-Grazed Refrigeration Glass uses a three-glass and two-seal cavity structure filled with argon. Argon has low thermal conductivity and high density, which can inhibit gas convection in the cavity and slow down internal and external heat exchange, thus reducing cold loss and energy consumption of refrigerating equipment. The sealing edge and the spacer strip jointly prevent the moisture from entering, keep the middle cavity dry and stable, reduce the condensation and fogging on the glass surface, and keep the items in the display cabinet clearly visible.

    Product advantages

    Better cold retention, lower energy use:  The sealed argon-filled cavities in Argon-Filled Triple-Glazed Refrigeration Glass slow heat transfer and limit air convection between panes, helping refrigerated cabinets hold temperature more steadily with less compressor workload and lower energy consumption.

     

    Clear display with less fogging:  The dry, sealed structure blocks moisture from entering the cavities and reduces condensation and surface fogging, so food, drinks and other chilled products stay clearly visible even in busy commercial display environments.

     

    Stable sealing and reliable fit:  Ground edges, uniform sealing and flat panes work together to support secure installation in refrigerator doors and display frames, reducing the risk of air leakage, seal damage or poor fitting during daily use.

     

    Flexible customization:  Available in different sizes and thicknesses, this refrigeration glass can be tailored to various cabinet designs, door structures and project requirements, making it suitable for both sample testing and bulk orders.

    Argon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration GlassArgon-Filled Triple-Glazed Refrigeration Glass


    Product attributes

    Customization

    Available

    Type

    Insulated Glass

    Shape

    Flat

    Structure

    Hollow

    Energy Transfer

    Radiation

    Deep Processing Depth

    Hollow Glass

    Color

    Clear

    Usage

    Furniture, Door, Building, Window

    Special Fucnction

    Soundproof,Heat Insulation

    Glass Type

    Low-E,Tempered,Float,Tinted,Laminated

    Application

    Building, Shower Door, Balcony

    Specification

    Customized

    Size range

    400mm*300mm-4000mm*2440,etc

    Production Capacity

    600000 square/Year

    Origin

    China

    Application area

    Commercial building cold-chain zones : Argon-Filled Triple-Glazed Refrigeration Glass  It can be used for doors and windows, partitions and observation windows in the refrigerated display area of commercial buildings such as supermarkets, shopping malls and cold chain logistics centers. It can reduce the loss of cold energy while meeting the requirements of transparent daylighting, and adapt to the requirements of building enclosure and indoor separation.
    Cold storage and refined room envelopes:  applicable to the observation window, door body and partition system of cold storage, cold storage room, low-temperature storage and other building parts. The tempered glass structure gives consideration to safety and sealing adaptability, helping to maintain the temperature stability in low-temperature areas and reduce surface dew.
    Pharmaceutical, laboratory and health buildings:  it can be used for low-temperature observation windows and partitions of pharmaceutical storage, low-temperature laboratory rooms, hospitals and scientific research buildings, meeting the requirements of building daylighting, visual management and clean space separation, and reducing the fogging effect caused by internal and external temperature difference.
    Commercial facades and international glazing systems:  suitable for curtain wall daylighting, indoor glass partition and cabinet door matching in places such as supermarkets and restaurants, food and beverage buildings and cold chain exhibition halls. Toughening treatment improves the safety of use. Three-floor argon filled structure gives consideration to thermal insulation, anti-condensation and building energy conservation requirements.

    Argon-Filled Triple-Glazed Refrigeration Glass


    Precautions for use

    Installation and frame fit:  When installing the Argon-Filled Triple-Grazed Refraction Glass, ensure that the frame size, flatness and reserved clearance match the glass unit to avoid forced extrusion or partial stress. The installation surface shall be flat and firm, and the sealant strip shall fit in place to prevent damage to the edge seal due to deformation of the frame or air leakage and condensation during use.

     

    Handling and storage:  the tempered glass edge is relatively sensitive, so suction cup or special tools shall be used for handling to avoid collision with corner, dragging or stacking pressure. Keep upright, ventilated and dry during storage, cushion soft materials at the bottom, keep away from damp and environment with sharp temperature difference, and prevent the protective film from aging or edges from moisture.

     

    Sealing and condensation control:  regularly check the state of edge seal, spacer strip and adhesive strip during use, and timely handle any debonding, crack or hollow layer fogging. Indoor humidity and ventilation management shall be coordinated for building cold stores, cold stores and other scenes to reduce surface condensation and maintain the permeability and thermal insulation stability of Argon-Filled Triple-Grazed Refraction Glass.

     

    Service environment and load limits:  the service conditions shall be evaluated according to the actual wind pressure, temperature difference and installation height of building doors and windows, partition or observation window, so as to avoid glass bearing concentrated load, hard object impact or improper opening. Although the strength of tempered glass is high, the edges and corners shall be well protected. It is strictly prohibited to change the installation node without confirming the structural safety.

    How to maintain

    Daily cleaning shall be gentle:  first, use soft cloth or sponge to remove sand and dust on the surface to avoid scratching the glass by dry wiping; Wipe with neutral cleaner and clean water. Avoid using strong acid and alkali, grinding powder and steel wire ball. The frame, adhesive tape and drain hole shall also be cleaned together to prevent dust and water from affecting the sealing and appearance.

     

    Regularly check the sealing and hollow layers:  focus on checking whether the edge sealant, spacer strip and adhesive strip are debonded, cracked or aged, and observe whether the hollow layer has signs of fogging, condensation or water ingress. In case of any abnormality, contact the manufacturer for evaluation and treatment in time. Do not disassemble or punch by yourself to avoid damaging the sealing structure.

     

    Avoid impact and improper stress:  the edges and corners of tempered glass are relatively sensitive. Avoid hard object collision, dragging and hanging heavy objects during use. Do not open holes or change the installation nodes at will. Attention shall also be paid to wind pressure, temperature difference and frame deformation of building doors and windows, partitions and observation windows to ensure that the glass is always under stable stress.

     

    Keep the frame and hardware in good condition:  regularly check the frame fasteners, adhesive tape elasticity and drainage channels, keep them ventilated and dry, and reduce the impact of long-term moisture on the edge sealing. It is suggested to arrange professional personnel to conduct regular patrol inspection for parts such as overhead curtain wall or observation window of cold store, and timely handle looseness, water seepage and sealing aging.

    FAQ

    We are an overseas engineering contractor. For the first cooperation, we want to test the order in small batches. How about MOQ and specification mixing?

    Communication can be carried out according to the idea of test order. MOQ usually depends on size, thickness, glass combination, hole location and packaging method. Mixing of different specifications will also affect production scheduling and cabinet installation. MOQ is generally 1 * 40FCL.

    Can tempered chilled glass be opened, slotted or re-cut?

    Not possible. Once the tempered glass is tempered, it shall not be cut, punched or edged, otherwise the stress layer will be damaged and the whole piece will be broken. Complete drawings shall be provided at the time of procurement before order placement, specifying hole location, notch, edge treatment and dimension, and the processing shall be completed by the manufacturer before tempering. If it is necessary to install hardware or reserve holes for the observation window and door glass of the building cold store, it must be confirmed in advance.

    Is payment only T/T accepted? Can I make L/C or partial payment?

    The common method is to pay T/T down payment and the balance payment before delivery. For large orders or long-term cooperative customers, L/C can be negotiated according to the order, and payment can be made according to the copy of bill of lading or in batches. Due to the high risk of rework and transportation damage of customized glass, manufacturers often have requirements on payment nodes and packaging acceptance. The payment proportion, document requirements, inspection method and final payment conditions shall be clearly stated during procurement, and then the issuing or remittance shall be arranged in combination with the delivery date.

    Customized hole location, special-shaped size and configuration of observation window of cold store, and how to arrange delivery date?

    The delivery date depends on the drawings to confirm the speed, glass configuration, tempered production scheduling and packaging method. Customized hole location, notch, special-shaped edge and argon filled three-layer structure shall be confirmed before tempering, so complete node drawing and dimension list shall be provided before order placement. Production and inspection time shall be reserved for regular batch orders, and production shall be scheduled earlier in peak season or for large orders; It is suggested to specify sample confirmation, production completion and loading time in the contract for foreign trade procurement to avoid affecting the project progress.

    Price quoted EXW or FOB? How long is the price normally valid?

    The quotation method can be EXW, FOB or CIF according to the purchase demand, depending on the receiving port, transportation responsibility and customs clearance arrangement. Three-layer argon filled refrigerated glass involves glass sheet, argon, sealing materials and toughening, and the price is affected by raw materials, exchange rate and order specifications, so the quotation usually has a validity period. It is suggested to confirm the packaging, edge processing, certification documents and loading costs included in the quotation before batch procurement, and agree the price adjustment conditions.

    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept