Products
Warm-Edge Energy-Efficient Insulated Glass
  • Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass
  • Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass
  • Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass
  • Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass
  • Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass
  • Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass
  • Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass

Warm-Edge Energy-Efficient Insulated Glass

Tianjin tianbo, supplier of Warm-Edge Energy-Efficient Insulated Glass, offers factory direct orders. The warm-edge spacer reduces edge heat loss and thermal bridging, while the sealed cavity improves insulation and lowers condensation risk. Ideal for energy-saving windows, facades and curtain walls, with customized sizes and glass configurations available for bulk projects.

    As a manufacturer and supplier, Tianjin tianbo accepts factory direct orders and bulk purchase for Warm-Edge Energy-Efficient Insulated Glass. This product is designed for residential and commercial windows, doors, facades and curtain walls where energy efficiency and comfort matter. The warm-edge spacer reduces thermal bridging at the glass edge, helping lower heat loss and condensation risk, while the sealed cavity improves thermal performance. It suits projects in varied climates seeking better insulation without compromising daylight. Custom glass types, thicknesses, cavity widths and sizes are available, with strict sealing and inspection for stable quality.

    Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass


    Product Principle

    Material composition: Warm Edge Energy Efficient Insulated Glass is composed of two or more pieces of glass, warm edge spacers, desiccants, and sealants. Warm edge spacing strips are usually made of materials or composite structures with lower thermal conductivity, replacing traditional aluminum strips, reducing heat conduction at glass edges, and lowering the risk of edge thermal bridges and condensation.

     

    Principle of insulation for hollow cavities: Sealed hollow cavities are separated between glass by spacer strips, and the cavities are filled with dry air or argon gas to suppress conduction and convective heat transfer; Desiccant absorbs residual moisture and keeps the chamber dry. When combined with Low-E coating, it can further reflect far-infrared thermal radiation and improve the overall window insulation performance.

     

    Frame making and lamination process: First, make spacer frames according to specifications and fill them with molecular sieves. Apply butyl rubber on the surface of the frame to form a preliminary seal; After cutting, grinding, and cleaning, the original glass sheet is precisely laminated with the spacer frame, and then the outer sealing is completed to form a double sealed structure, maintaining the stability of the cavity.

     

    Sealing and inspection: After sealing, cure according to the process requirements to firmly bond the sealant with the glass and spacer strip; The finished Warm-Edge Energy-Efficient Insulated Glass needs to be inspected for dimensions, edge sealing continuity, drying status of the hollow layer, and appearance quality. After confirming that there is no fogging, delamination, or obvious defects, it can be packaged and shipped.

    Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass


    Product Specifications

    Customization

    Available

    After-sales Service

    on-Line Technical Support

    Warranty

    Yes

    Type

    Insulated Glass

    Shape

    Flat

    Structure

    Hollow

    Glass Thickness

    3-19mm

    Energy Transfer

    Radiation

    Deep Processing Depth

    Hollow Glass

    Color

    Clear,etc

    Usage

    Furniture, Door, Building, Window

    Material

    Qualified Tempered Float Glass

    Processing

    Custom Designed

    Edge Working

    Flat-Edge, Beveled-Edge,Og,Pencil Edge Polished

    Sheet Glass

    Tinted Glass , Clear Glass . Tempered Glass

    Customized

    Customized

    MOQ

    1*40 FCL

    Design Style

    Industrial,Modern

    Delivery Time

    15-25 Days

    Payment Term

    T/T

    Means of Transportation

    Sea, Train, Air

    Transport Package

    Strong Plywood Case

    Specification

    Any size as your request

    Origin

    China

     

    Product Advantages

    Warm edge structure: Warm Edge Energy Efficient Insulated Glass uses low thermal conductivity warm edge spacer strips instead of traditional aluminum strips to reduce heat conduction at the glass edges, lower overall window edge heat loss, and improve insulation performance. It is particularly suitable for doors, windows, and curtain wall areas that require energy conservation and anti condensation.

     

    Reduce condensation and improve user comfort: Warm edge spacers make the temperature distribution at the edge of the glass more uniform, combined with a dry and sealed cavity, which can reduce the risk of condensation at the bottom in winter or high humidity environments, maintain clear visibility, and reduce the impact of moisture on the window frame and indoor environment.

     

    Stable sealing, balancing insulation and sound insulation: The spacer strip, desiccant, and sealant work together to form a stable cavity, keeping the cavity dry and reducing the risk of fogging and seal failure; Double layered glass and hollow layers can also weaken some external noise and improve indoor sound environment.

     

    Support customization and adaptation to different building systems: Glass combinations, thicknesses, sizes, and cavity configurations can be customized according to project requirements, making it easy to coordinate with different door and window frames, curtain wall nodes, and installation methods. It is suitable for engineering bulk procurement and energy-saving project matching.

    Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass


    Application Areas

    Residential doors and windows in cold regions: Warm Edge Energy Efficient Insulated Glass is suitable for outdoor windows, balcony doors, and bedroom windows with large temperature differences in winter. Warm edge spacers can reduce edge heat loss, reduce window condensation and cold air sensation, and improve living comfort and insulation performance.

     

    High humidity and prone to condensation building areas: Suitable for kitchen, bathroom exterior windows, swimming pools, and damp areas building facades. The warm edge structure makes the temperature distribution at the edges more uniform, and the dry and sealed middle cavity helps reduce condensation and moisture adhesion at the edges, maintaining a clear view.

     

    Office and commercial building curtain walls: can be used for the exterior windows and curtain wall parts of office buildings, shopping malls, and hotels, improving the overall window insulation performance while maintaining natural light transparency, reducing air conditioning and heating energy consumption, and suitable for commercial projects that require energy conservation and indoor comfort.

     

    Low energy buildings and renovation of existing doors and windows: suitable for passive low-energy buildings, green buildings, and energy-saving renovation projects of old windows. Glass configuration and size can be customized according to the original frame and usage needs, improving the insulation and anti condensation level of doors and windows without changing the appearance of the building.


    why choose us 

    R&D and technology transformation capabilities support non-standard projects: Since its establishment in 2014, Tianbo has continuously accumulated experience in the field of deep processing of building safety glass, and is able to transform project drawings and design intentions into producible glass specifications, hole positions, and edge treatment solutions. Based on a 30000 square meter factory area and multi process processing conditions, we can cooperate with customers to complete process confirmation for irregular, non-standard sizes and composite configurations, reducing installation deviations and rework in the later stage.

     

    Quality inspection and batch traceability run through the production process: The company has fully passed the 3C safety system certification, and has set up inspections and records in processes such as raw material selection, cutting and grinding, tempering, hollow lamination, laminating, and finished product inspection. For engineering orders, batch information and technical data facilitate project inspection, anomaly detection, and subsequent patch verification, which is beneficial for maintaining the quality consistency of bulk supply.

     

    Flexible production scheduling and delivery management are suitable for multi specification orders: tempered glass annual production capacity of 1 million square meters, insulated glass annual production capacity of 600000 square meters, laminated glass annual production capacity of 350000 square meters, with the production capacity foundation to undertake multi category and multi specification engineering orders. Factories can coordinate production scheduling based on order structure and delivery requirements, reducing communication costs and quality fluctuations caused by outsourcing turnover, and improving the coherence of batch delivery.

     

    The export project supporting and after-sales patching process is relatively complete: for overseas engineering and wholesale customers, Tianbo can cooperate to provide certification materials, packaging protection, and shipping document support, and establish communication processes around patching, rework, and abnormal feedback. For projects that require partial delivery or post maintenance, it facilitates continuous communication with customers and reduces coordination pressure after bulk supply.

    Warm-Edge Energy-Efficient Insulated GlassWarm-Edge Energy-Efficient Insulated Glass


    FAQ

    What glass combinations and sizes can be customized? Is rework allowed after production?

    Customizable items include glass type, thickness, coating, cavity width and dimensions. Finished insulated glass cannot be cut or drilled; all edge work and holes must be confirmed before production.

    How to get a quotation? 

    We need the information of glass composition, thickness, sizes, quantity and processing etc. 

    What's the MOQ?

    Generally, there is no MOQ for processing glass, if want to receive the best price, the more quantity, the better price.

    Can you do the production as customized? 

    Yes, we have a professional technique team, we could produce the glass depends on your requirements. 



    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept