Products
Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows
  • Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and WindowsDouble-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows
  • Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and WindowsDouble-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows
  • Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and WindowsDouble-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows
  • Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and WindowsDouble-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows

Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows

Tianjin tianbo glass, a wholesale supplier, provides Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows. Edge processing, flatness and fabrication methods are controlled: edges are ground and polished, panes remain flat for accurate fitting, and cutting, sealing and assembly follow clear procedures. This supports insulation and soundproofing.

    Tianjin Tianbo Glass supplies Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows to global projects, with customization available to match different specifications. This insulated glass unit consists of two glass panes separated by a sealed spacer, creating a dry air or gas cavity that improves thermal insulation, reduces outside noise and helps prevent condensation. It is widely used in residential windows and balcony doors, commercial office partitions, shopfronts, curtain walls and interior glazing where comfort and energy efficiency matter. The unit can be tailored to different door and window systems, with options for edge treatment, spacer design and assembly to suit project needs. It is suitable for new construction, renovation and bulk procurement, helping builders and fabricators achieve stable performance and clean appearance.

    Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and WindowsDouble-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows


    What is it

    A Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows is a factory-assembled glazing unit made of two glass panes separated by a sealed spacer. The cavity between the panes is filled with dry air or gas and sealed to keep moisture out, forming a stable insulating layer.

    This structure works in three ways: the sealed cavity slows heat transfer, improving thermal insulation; the mass and air gap reduce noise, making rooms quieter; and the dry sealed space helps prevent condensation on the glass surface. The unit is assembled under controlled conditions, with edge sealing and spacer design matched to the door or window system.

    It is widely used in apartment windows, balcony doors, office partitions, shopfronts and commercial facades. Compared with single glazing, it offers better comfort, lower energy loss and improved sound control, making it a practical choice for both residential and commercial projects.


    Product advantages

    · Versatile Application —This Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows is engineered for use across a wide range of architectural scenes, from private homes to commercial buildings.

    · Residential Comfort — Ideal for apartment windows, balcony doors, and bedroom/living room windows, it effectively improves thermal insulation, soundproofing, and anti-condensation to enhance daily living comfort.

    · Commercial Performance —Perfectly suited for office partitions, shop fronts, office building curtain walls, hotel doors and windows, and public building daylighting areas, it balances transparent aesthetics with energy-saving efficiency.

    · Superior Soundproofing — Especially effective for street-facing buildings and noisy urban environments, it reduces external noise for a quieter, more comfortable indoor space.

    · Thermal & Anti-Condensation — In regions with large temperature differences, the insulating air cavity minimizes heat transfer and prevents surface condensation throughout the year.

    · Flexible Project Compatibility — Suitable for new construction, window renovation, and bulk procurement, it adapts seamlessly to various door and window systems to meet diverse project needs.


    Product specification

    Customization

    Available

    Type

    Insulated Glass

    Shape

    Flat

    Structure

    Hollow

    Energy Transfer

    Radiation

    Deep Processing Depth

    Hollow Glass

    Color

    Clear, Blue, Green, etc

    Usage

    Furniture, Door, Building, Window

    Material

    Qualified Tempered Float Glass

    Processing

    Custom Designed

    Edge Working

    Flat-Edge, Beveled-Edge,Og,etc

    Customized

    Customized

    Shapes

    Rectangular, Square, Circle, Oval,or

    MOQ

    1*40 FCL

    Production Capacity

    1000000㎡Per Year

    Origin

    China

     

    Product application area

    · Wide Application Range — Suitable for residential and commercial doors and windows across various architectural scenes.

    · Residential Use — Commonly applied to apartment windows, balcony doors, and bedroom/living room windows; effectively improves thermal insulation, soundproofing, and anti-condensation for enhanced living comfort.

    · Commercial Use — Ideal for office partitions, shop fronts, office building curtain walls, hotel doors and windows, and public building daylighting areas; balances transparent aesthetics with energy-saving performance.

    · Excellent Sound Insulation — Particularly effective for street-facing buildings and noisy urban environments.

    · Thermal & Anti-Condensation Performance — In regions with large temperature differences, the insulating air cavity reduces heat transfer and prevents surface condensation.

    · Flexible Project Adaptation — Suitable for new construction, window renovation, and bulk procurement; compatible with various door and window systems to meet diverse residential and commercial needs.

    Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and WindowsDouble-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows


    production process

    · Precision Glass Preparation — Original glass sheets undergo precision cutting, edge grinding, and chamfering, followed by brush cleaning with high-pressure drying to ensure a perfectly clean, water-stain-free surface ready for lamination.

    · Aluminum Spacer Frame Forming — Aluminum spacer frames are bent to exact dimensions and uniformly filled with molecular sieve desiccant for long-term absorption of residual moisture inside the insulating cavity.

    · Primary Seal — Butyl Coating — Butyl rubber is coated on both sides of the spacer frame to complete the first seal, ensuring superior air tightness and initial adhesion strength.

    · Lamination & Plate Pressing — The two production lines converge: cleaned glass sheets and spacer frames are precisely aligned and pressed together under plate pressing for accurate assembly.

    · Secondary Seal — Polysulfide or silicone sealant is applied along the outer perimeter for structural fixation and long-lasting weatherproof water resistance.

    · Rigorous Quality Inspection — Each finished unit undergoes individual inspection of appearance, dimensions, tightness, and dew point before warehousing.

    · Consistent Performance — Every insulating glass unit delivers excellent thermal insulation, soundproofing, and anti-condensation performance.

    Double-Glazed Insulated Glass Unit for Residential and Commercial Doors and WindowsDouble-Glazed Insulated Glass Unit for Residential and Commercial Doors and Windows


    FAQ

    Q1:How does the sealing structure of this insulating glass unit guarantee long-term non-failure? How to judge the sealing quality during procurement?

    A1:Insulated glass is usually composed of spacer strip, butyl rubber and peripheral sealant, and the key lies in continuous edge sealing, no bubble and debonding. During procurement, check the edge sealing process, focus on whether the hollow layer is dry, whether the spacer strip is flat, and whether the sealant is uniform, so as to reduce the risk of later fogging and sealing failure.

    Q2:Is the hollow filled with air or argon? Significant impact on insulation and sound insulation? Can you select by project?

    A2:Generally, it can be filled with dry air or filled with argon according to the project requirements to improve the insulation performance. The type of aeration will affect the performance of the insulation and sound insulation, but will need to be judged in conjunction with the glass configuration, insulation thickness, and door and window systems. During the procurement, the climate, energy conservation requirements and budget of the project site can be determined, and then the inflation and corresponding configuration can be determined to avoid blind selection.

    Q3:Can you customize different glass combinations such as Low-E, Toughened, Laminated? How are dimensions and thickness determined?

    A3:Support customized glass combination according to the project. Low-E, tempered, interlayer and other different configurations can be selected to meet the needs of insulation, safety and sunshade. Size and thickness shall be determined according to door and window system, wind pressure resistance, installation method and transportation conditions. It is suggested to provide drawings or opening dimensions during procurement. The manufacturer shall evaluate the machining range and configuration scheme, and then confirm the sample or batch production.

    Q4:During transportation, the insulating glass is easy to be damaged or the sealing is damaged. How do you pack and divide the responsibilities?

    A4:Insulating glass unit has a large volume. Generally, protective film, foam, wooden frame or wooden box are used for packaging, and edge protection and fixing are well done to reduce transportation vibration and collision. The packing method will be confirmed before delivery, and the transportation liability and insurance can be negotiated according to the trade terms. It is suggested to check the external package and glass state on site when receiving the goods. In case of any damage, take photos in time and contact the sales personnel for handling, so as to facilitate subsequent claims or reissue.

    Q5:What is the volume, sample policy and delivery time of batch purchase?

    A5:Order intake will be evaluated based on size, configuration, glass combination, and order complexity, and conventional batch orders can be negotiated. Samples are generally available for sample confirmation, but sample fees and freight shall be communicated according to the actual situation. Delivery time is affected by quantity, customized process and scheduling, and production and inspection time is generally reserved for batch orders. It is suggested to specify specification, quantity and delivery time before procurement so that the manufacturer can provide stable schedule.

    Q6:Is it a quality problem if the insulating layer is found to be foggy or dewed after installation? How to handle after sales?

    A6:Fogging inside the hollow layer is usually related to sealing failure, which may be a quality problem; However, the condensation on the glass surface is mostly related to the indoor and outdoor temperature difference and humidity, which shall be judged separately. If it is confirmed that it is caused by internal fogging, abnormal sealing or ex-factory defect of the hollow layer, please keep the photo, batch and installation information, and we will assist in troubleshooting and arrange for reissue, replacement or negotiation of solutions according to the situation. Improper installation or damage caused by external force shall be evaluated separately.



    Send Inquiry
    Contact Info
    • Address

      50 meters south of the intersection of Road No. 7 and Yanfeng West Road, North Zone, High-tech Industrial Park, Ziya Economic and Technological Development Zone, Tianjin, China

    If you have any enquiry about quotation or cooperation, please feel free to email us or use the following inquiry form.Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept